Showing posts with label piezo soundboard transducer. Show all posts
Showing posts with label piezo soundboard transducer. Show all posts

4/28/2012

AKG C411/L Ultra-Light Condenser Microphone for Guitar, Violin, and Other Stringed Instruments Review

AKG C411/L Ultra-Light Condenser Microphone for Guitar, Violin, and Other Stringed Instruments
Average Reviews:

(More customer reviews)
PROS:
1-the flexibility to experiment with placement and tones on the soundboard and bridge.
2-sounds better than most pickups.
3-no need to drill holes in the guitar
4-low cost (also see CONS)
5-sound got even better when I combined the C411 signal with an Audio Technica AT831b clip-on mic pointed at the soundhole. This sound was almost as good as using my AKG C414 in the studio.
6-adhesive sticks really well and doesn't mark up or damage the wood
7-solid/loud output
8-can be used on multiple guitars
9-using two C411s at the same time (placed on different parts of the guitar)would probably sound even better
CONS:
1-doesn't sound better than a high-end condensor mic
2-cost of the mic is low but the AKG cable you need to use the mic cost more than mic.
3-attack is good for fingerstyle/classical/flamenco players but not ideal for really fast pickers (maybe a compressor would remedy this issue)
OVERALL:
worth the money and worth trying out as an alternative to other pickups/transducers for live sound.

Click Here to see more reviews about: AKG C411/L Ultra-Light Condenser Microphone for Guitar, Violin, and Other Stringed Instruments

The C 411 condenser acoustic pickup with its tailored frequency response is ideal for acoustic guitar, mandolin, violin and most other stringed instruments. Placing the small ultra-light C 411 on or near the bridge will reproduce a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 is easy with the included non-marring reusable adhesive compound. The C 411 is the stethoscope for your acoustic instruments. Polar pattern: figure 8 (vibration pickup, Frequency range: 10-18,000 Hz, Sensitivity: 1 mV/ms2 (vibration pickup), Max. SPL for 1 % THD: approx. 100 dB SPL,impedance: 200 Ohms unbalanced. 9 to 52 volts phantom power or battery powering from B 29 L or AKG bodypack transmitters, Connector: C 411: 3-pin male XLR; Cable length: 3 m (10 ft.), Finish: matte black. Size: 27 x 14 x 9.5 mm (1 x 0.5 x 0.3 in.), Net/shipping weight: 18 /225 g (0.3/7.9 oz.). Standard accessories: adhesive compound. Optional accessories: for C 411 L: B 29 L battery power supply, MPA III L MicroMic phantom power adapter.

Buy NowGet 18% OFF

Click here for more information about AKG C411/L Ultra-Light Condenser Microphone for Guitar, Violin, and Other Stringed Instruments

Read More...

4/10/2012

Pickup Transducer for Banjo, Mandolin, Guitar, Ukulele, Etc Review

Pickup Transducer for Banjo, Mandolin, Guitar, Ukulele, Etc
Average Reviews:

(More customer reviews)
I asked at a well known and respected guitar shop in the San Francisco area about installing a pickup in my Pono tenor ukulele which is very nice except that it projects sound back to the player poorly. The shop wanted to put in a similar style (stick on, unamplified piezo soundboard transducer) Fishman pickup for $175. That seemed unreasonable for a $300 instrument. So I found this pickup, read the one review, and figured I'd get it and try it out. Worst case if I didn't like it, I could just pull it out and have the Fishman installed and use this transducer on other instruments in emergencies. Well, it was easy to install and the ukulele sounds great when plugged into our Roland AC-90 acoustic amp. I don't feel like I'm missing anything except the brand name recognition. Try it. I bet you'll like it too.

Click Here to see more reviews about: Pickup Transducer for Banjo, Mandolin, Guitar, Ukulele, Etc

This is the perfect solution if you need to amplify your instrument and do not want to break the bank but still want a professional setup without having to call in a Luthier. This little transducer is a "hot" pickup and you will be very impressed with the quality at such an inexpensive price. Just mount the transducer inside your instrument with the supplied double stick tape and run the 1/4" jack out a hole that you make in your ideal location and thats it (Transducer has 12" cable to Jack). You can amplify your mandolin, banjo, violin, ukulele, guitar, bass, viola, cello, and just about anything else you can think of. This unit works with a standard 1/4" plug. You can connect it to your PA, mixer, or amplifier. It's that easy to have a professional look and the amplified sound your looking for at a very small price.

Buy Now

Click here for more information about Pickup Transducer for Banjo, Mandolin, Guitar, Ukulele, Etc

Read More...

8/26/2011

Fishman Classic Series V-100 Violin Pickup Review

Fishman Classic Series V-100 Violin Pickup
Average Reviews:

(More customer reviews)
I agree that attaching this type of pickup is awkward at best, but the quality of the sound is excellent for a pickup at this price (you really need a high quality microphone for true sound reproduction, which has its own issues). This price is very reasonable, but if you want to spend a little more Fishman also makes a model with a clamp-on 1/4" jack that I imagine is much easier to use.


Click Here to see more reviews about: Fishman Classic Series V-100 Violin Pickup

Classic Series V-100 Violin/Viola PickupThis piezo-ceramic pickup mounts in the wing slot of the violinbridge with Fishman's patented Floating Mount System. Lightweightto minimizemuting, it includes a mini jack which mountsto the tailpiece.

Buy Now

Click here for more information about Fishman Classic Series V-100 Violin Pickup

Read More...